Tel: 0191 377 7345 | Email: sales@pchenderson.com

Tangent Round the Corner

Top-hung door system for round the corner applications

SKU:
tangent-round-the-corner

Contact a member of our sales team to enquire about this product

ProductMax. Door WidthMax. Door HeightDoor Thickness RangeMax. Door WeightDoor MaterialApplication
Tangent RTC 290900mm2400mm35 - 50mm35kgWood/MetalInterior/Exterior
Tangent RTC 301900mm3300mm45 - 55mm55kgWood/MetalInterior/Exterior
Tangent RTC 301H900mm3600mm45 - 55mm70kgWood/MetalInterior/Exterior
Description PDF DXF DWG
89 - CHANNEL LVL A
89 - CHANNEL LVL A 45.38 KB 293.96 KB 251.04 KB
1A 290 - BRACKET LVL A
1A 290 - BRACKET LVL A 53.36 KB 375.16 KB 273.99 KB
1A 301 - BRACKET LVL A
1A 301 - BRACKET LVL A 57.27 KB 430.05 KB 285.79 KB
290 - TANGENT (RC) LVL A
290 - TANGENT (RC) LVL A 107.47 KB 3.60 MB 1.02 MB
290 - TRACK LVL A
290 - TRACK LVL A 46.50 KB 325.05 KB 258.13 KB
301 - TRACK LVL A
301 - TRACK LVL A 116.14 KB 748.66 KB
301(H) - TANGENT (RC) LVL A
301(H) - TANGENT (RC) LVL A 127.57 KB 3.62 MB 1.01 MB
301H - TRACK LVL A
301H - TRACK LVL A 44.64 KB 334.94 KB 254.59 KB
4RX 301TS - BRACKET LVL A
4RX 301TS - BRACKET LVL A 57.44 KB 528.06 KB 311.08 KB
600B - TRACKCURVE LVL A
600B - TRACKCURVE LVL A 59.62 KB 392.81 KB 276.90 KB
600BH - TRACKCURVE LVL A
600BH - TRACKCURVE LVL A 59.65 KB 392.87 KB 276.91 KB
600K - TRACKCURVE LVL A
600K - TRACKCURVE LVL A 59.83 KB 441.76 KB 288.58 KB
62A - HANGER LVL B
62A - HANGER LVL B 108.13 KB 1.81 MB 1.09 MB
62K - HANGER LVL A
62K - HANGER LVL A 84.99 KB 1.72 MB 618.44 KB
63A - HANGER LVL A
63A - HANGER LVL A 71.56 KB 1.23 MB 495.30 KB
63K - HANGER LVL A
63K - HANGER LVL A 71.56 KB 1.26 MB 501.61 KB
65 - HINGE LVL A
65 - HINGE LVL A 65.70 KB 65.70 KB 773.92 KB 773.92 KB 369.90 KB 369.90 KB
67 89 - GUIDE LVL A
67 89 - GUIDE LVL A 79.40 KB 1.29 MB 510.56 KB
67 97 - GUIDE LVL A
67 97 - GUIDE LVL A 79.30 KB 1.26 MB 502.71 KB
68 89 - GUIDE LVL A
68 89 - GUIDE LVL A 65.16 KB 761.90 KB 371.04 KB
68 97 - GUIDE LVL A
68 97 - GUIDE LVL A 66.43 KB 816.85 KB 385.81 KB
97 - CHANNEL LVL A
97 - CHANNEL LVL A 44.89 KB 294.85 KB 251.70 KB
  • Three systems available to cater for door leaves weighing up to 80kg
  • Doors stack clear of the opening and park along the adjacent side wall
  • Ideal for applications where a bunched unit of parked leaves would be impractical
  • Deluxe fittings available in polished or satin anodised aluminium finishes
  • Doors can slide to one or both sides and can cover any width of opening by using any number of units on a single track

Tangent Round the Corner is a robust top hung door system for round the corner residential, commercial or light industrial wooden or metal doors. The doors may be panelled, flushed or glazed and can weigh up to 35kg, 55kg or 70kg each. The system is particularly suited where a bunched unit of parked panels would be impractical. Only 3 to 5 panels should be hinged in 1 unit, but any number of units may be used to suit panels from a minimum width of 711mm to a maximum of 900mm.

More Information

More Information
Application Residential/Commercial
Situation Interior/Exterior
No. of Doors 4+
Door Material Wood or Metal
Max. Door Weight 70kg
Max. Door Width 900mm
Door Thickness Range 33-55mm
Max. Door Height 3600mm

Q&A

Question:

Why must the panels be a minimum width of 711mm?
Question by: Steven Brady on 26 Mar 2021, 00:00

Answer:

Good morning,   If the doors were smaller than 711mm wide, the hangers would be installed too close together to travel the circumference of the curve.   Thanks,   Kate Marketing Executive
Answer by: admin admin (Admin) on 5 May 2021, 09:24

Question:

I have a Tangent system in my garage. After years of satisfactory running I am now experiencing a number of problems. I think a possible partial cause is that the bottom of the doors are fouling the ground. I note that you mention this on the website and the need for height adjustment but I have not been successful in working out how to do this. Is there an instruction manual/sheet that I could refer to? I note that the hangers have two nuts but the hanger on my first door only has one. Do I need a replacement? Thank you for your help.
Question by: paul on 19 May 2021, 01:00

Answer:

Hello Thank you for the question and apologies for the delay in responding. You are correct the door can be lifted slightly by tightening the nuts on the bottom of the hangers this will raise the door slightly and hopefully stop the door hitting the floor. We do not have instructions as such as it is basically turning the nuts to lift the door. If you are still having problems or require anymore detailed information then you can of course call our customer service / technical team on 0191 3770701 and they can go over this on the telephone with you. Regards, John
Answer by: admin admin (Admin) on 5 Jul 2021, 09:17
Accessories and Spares

Make an enquiry

Contact a member of our sales team to enquire about this product